[actd]

Has anyone considered (or even better, succeeded) adding additional power sockets? I would love to have a USB socket in the back of the centre console for the rear passengers to use and also a powered phone holder without having to have a wire running up the outside of the dashboard - since I have a standard ignition key, I have a blanking plug where the Tekna has the push button start, so this might be an ideal place to mount a phone holder.

 

[Rocks703]

I'm sure I've seen a post on the american forum where someone has done this. I'll have a look later and copy the thread if I can find it.

 

[Deks]

I too have seen a post on this but can't find it have had a quick look on UK sites

 

[ctrdetailing]

should be simple to do if you can handle a little diy , take the feed from the front power socket as its wiring is more than capable of running 2 power sockets

 

[Rocks703]

http://www.ebay.co.uk/itm/FUSED-12v-Accessory-Cigarette-Lighter-Power-Socket-Kit-/180502761187get one of these (or similar) and then piggy back off the other power supply would be your easiest option. Some one on here might have instructions for accessing the dash.

 

[Paul_S]

Spot on Rocks703 Just fit a USB adapter in the 12v supply and jobs a goodun'

 

[actd]

Don't want to take the wire out of the existing socket as I don't like wires where they aren't necessary - I'd much rather piggy back into the wires going into the back of the accessory socket and keep all of the wires hidden, and possibly put a light into the back of the armrest at the same time for the rear passengers.

 

[Paul_S]

Yep, that's what I was aiming at