Fault code C1130 and anti skid light on

Got a problem, look here to see if its known or let others know of the issue
xenolith05
Posts: 4
Joined: Sun Sep 02, 2018 8:01 pm

Re: Fault code C1130 and anti skid light on

Post by xenolith05 » Wed Sep 05, 2018 6:18 am

vexorg wrote:
Sun Sep 02, 2018 9:19 pm
There is an engine change with the layout of that pipe. If it's not the one shown in the photo above, then the sensor and pipe is slightly further back behind the engine, in the same general area. I found photos on the older one on here I think (or maybe google), then found my engine was a later one.
Thanks vexorg


vexorg
Posts: 71
Joined: Thu May 24, 2018 9:03 pm

Re: Fault code C1130 and anti skid light on

Post by vexorg » Wed Sep 05, 2018 8:26 am

The older style has a much simpler pipe to clear, just getting to the sensor is a bit more difficult. The red pipe in that last photo for clarity, you can see the sensor just at the top, held in by a spring clip that pulls out to the side.


xenolith05
Posts: 4
Joined: Sun Sep 02, 2018 8:01 pm

Re: Fault code C1130 and anti skid light on

Post by xenolith05 » Tue Sep 11, 2018 6:08 pm

Does anyone know if a P0471 code would give the same sort of problems. I’ve had the car on the diagnostics and this code plus a cruise control code P1525 was logged. I think the cruise control is being triggered as a result of the P0471. Thanks


marrygold
Posts: 53
Joined: Fri Sep 29, 2017 1:12 pm

Re: Fault code C1130 and anti skid light on

Post by marrygold » Tue Sep 11, 2018 9:03 pm

just clean out the pipe with a cable then clear the codes. change the senor if the code comes back up.
a cheap obd will do the job.


vexorg
Posts: 71
Joined: Thu May 24, 2018 9:03 pm

Re: Fault code C1130 and anti skid light on

Post by vexorg » Thu Sep 13, 2018 8:03 am

It does sound more like a faulty sensor than the same issue above. The blocked pipe gives a very specific fault (that has no real bearing on the fault).


Post Reply

Return to “Faults and Fixes”