WHERE TO BUY NUTS & BOLTS - UK - NEW MEMBER

info on how to: DIY mods repairs etc
Post Reply
Typecastboy
Posts: 7
Joined: Sun Mar 19, 2017 1:49 pm

WHERE TO BUY NUTS & BOLTS - UK - NEW MEMBER

Post by Typecastboy » Wed Apr 26, 2017 9:27 am

Hi, I'm a new member (I've just introduced myself in the New Member part of the forum).

I've just bought a 2011 Dig-T Juke Acenta that is a Cat D write-off. I have attached a picture here.

I've started to source the parts to repair it, but as you can see from the picture, because the old bumper/lights etc are missing, I don't have the bolts and clips and I don't know what they are.

There doesn't appear to be a Haynes book for the Juke and I've found a couple of US sites where you can buy the bits but nothing for the UK. I'm sure a lot of the bolt are generic but not knowing what type of nuts/bolts/clips etc, I can't buy them.

Does anyone know where I can either find out what bolts are what, or where to buy them, I would appreciate it.

I'm sure I'll have other questions as my rebuild goes on. The car is coming on Friday. I normally buy written off Fiat 500s and repair them, but this one is for me. Thanks in advance.

Screen Shot 2017-04-26 at 10.19.27.png



Bruiser01
Posts: 30
Joined: Fri Mar 17, 2017 7:21 am

Re: WHERE TO BUY NUTS & BOLTS - UK - NEW MEMBER

Post by Bruiser01 » Wed Apr 26, 2017 1:06 pm

Welcome to the house of fun.

Partsouq is a good source of information for what you are doing. Check out the link below.

https://partsouq.com/en/catalog/nissan/part/EL/F15/620

Best regards
Dave
2017 Nissan Juke 1.2 dig-T Tekna in ink blue :D
2017 Nissan Xtrail 1.6 dig-T Tekna in silver :D


User avatar
M-J
Posts: 1281
Joined: Thu Aug 08, 2013 8:35 am

Re: WHERE TO BUY NUTS & BOLTS - UK - NEW MEMBER

Post by M-J » Thu Apr 27, 2017 11:46 am

Welcome to the Madhouse ... this may be of use to you, access to an online WSM (American edition!) courtesy of the American Nissan Owners Club >>> http://www.nicoclub.com/FSM/Juke/2012/

And from the looks of things, you may have fun with the Airbag Sensor that sits behind the front grill (there is a post on here somewhere from another member that bought a front end damaged car ... had a few issues getting his car set up, but if you can find the post you'll be able to read all about it ;) )

Enjoy

M-J :D
Ex - Gun Metal AWD Tekna 1.6 DIG-T M-CVT [now no more :D ]        http://www.tiger800.co.uk/

Range Rover Sport 3.0 HSE Dynamic SVO MkII - http://www.army.mod.uk/join/Join-as-a-Soldier.aspx


Typecastboy
Posts: 7
Joined: Sun Mar 19, 2017 1:49 pm

Re: WHERE TO BUY NUTS & BOLTS - UK - NEW MEMBER

Post by Typecastboy » Fri Apr 28, 2017 6:21 pm

What a result. I got the car today and in the boot was two bags full of bolts. I think there are some missing but there are a lot there. There were also lots of bits that I thought I had to buy. The air baffles for one. About £40 each. They are broken but can easily be plastic welded, so saving a few quid there.

I'll update with more pictures as I put it all back together. Some parts I have now, others are on order, so it won't take me long to get it back on the road.


wacked1970
Posts: 62
Joined: Tue Nov 22, 2016 8:56 pm

Re: WHERE TO BUY NUTS & BOLTS - UK - NEW MEMBER

Post by wacked1970 » Fri Apr 28, 2017 6:54 pm

Good luck Typecastboy. Look forward to see the end result. 👍🏼
Haptic Blue. Tekna dci 2013


Typecastboy
Posts: 7
Joined: Sun Mar 19, 2017 1:49 pm

Re: WHERE TO BUY NUTS & BOLTS - UK - NEW MEMBER

Post by Typecastboy » Tue May 02, 2017 8:58 am

Thanks, It's all going well so far. I've either got everything or it's on order, just waiting for it to arrive. I have one problem so far. I had the two radiator air baffles in the boot. Both were broken, but I have plastic welded them back together saving me nearly £100. I've worked out where the offside one goes, but can't for the life of me work out where the nearside one bolts on. It seems they are a different shape depending on what engine is in the car. I've found some pictures of a non Dig-T 1.6 and they are a completely different shape. I will post some pics later and hopefully someone might be able to tell me where it goes. At the moment, I'm thinking of leaving the thing off.


Post Reply

Return to “How to”


Who is online

Users browsing this forum: No registered users and 1 guest