Diamond Cut Alloys

All things clean
Post Reply
Steve&Katie
Posts: 5
Joined: Wed Apr 25, 2018 4:27 pm

Diamond Cut Alloys

Post by Steve&Katie » Wed Apr 25, 2018 6:02 pm

Hey guys

Just became a Juke owner and am quite new to big sparkly alloys 🤑

Does anyone know roughly how much I should be looking at for alloy refurbs on these

IMG_20180425_142416.jpg

It looks like the previous owner has painted them 🙄🙄
N-Tec 1.6 Black 63 Plate


User avatar
Chrisbp
Posts: 14
Joined: Mon Nov 30, 2015 10:13 pm

Re: Diamond Cut Alloys

Post by Chrisbp » Wed Apr 25, 2018 8:50 pm

I paid about £100 each to get diamond cut refurb however the two others that Nissan replaced under warranty are starting to get patches of 'spidering under the lacquer in places after only two years of not particularly hard use - diamond cut is just not practical long term in my opinion


Steve&Katie
Posts: 5
Joined: Wed Apr 25, 2018 4:27 pm

Re: Diamond Cut Alloys

Post by Steve&Katie » Wed Apr 25, 2018 9:36 pm

Thanks Chris I haven't been able to get a proper quote yet as the body shops I have called have just given the usual sharp intake of breath followed by its not going to be cheap however we don't have the equipment to do them 🙄. I will see how we get on with them but it seems the previous owner has just bodged the paintwork with cheap repairs as the bumper is peeling and the alloys look like the scuffs have just been painted over.
N-Tec 1.6 Black 63 Plate


Post Reply

Return to “Detailing”