Visia reversing camera & head unit

In car questions, Stereo satnav, DVD's Camera's etc
Post Reply
yeoman
Posts: 9
Joined: Tue Dec 03, 2019 8:09 am

Visia reversing camera & head unit

Post by yeoman » Wed Dec 04, 2019 8:26 am

My wife has a 2016 Visia and I would like to fit the Nissan juke reversing camera (or an aftermarket one) and connect it to a Kenwood double din head unit. Can anyone tell me the following:-
1. is the Visia wiring loom the same as the Tekna's
2. Anyone fitted a reversing camera.
Many thanks
Greg


vexorg
Posts: 346
Joined: Thu May 24, 2018 9:03 pm

Re: Visia reversing camera & head unit

Post by vexorg » Wed Dec 04, 2019 10:07 am

If you look at the headunit connector then you should see if the wiring is there.

I recently upgraded my son's micra from a simpler headunit to the satnav connect1, mainly to use bluetooth for music, but it was the cheapest option, about £100 for a nissan headunit and most of the rest was plug and play. It might be easier than you think if you fit a nissan headunit.


yeoman
Posts: 9
Joined: Tue Dec 03, 2019 8:09 am

Re: Visia reversing camera & head unit

Post by yeoman » Wed Dec 04, 2019 3:49 pm

vexorg wrote:
Wed Dec 04, 2019 10:07 am
If you look at the headunit connector then you should see if the wiring is there.

I recently upgraded my son's micra from a simpler headunit to the satnav connect1, mainly to use bluetooth for music, but it was the cheapest option, about £100 for a nissan headunit and most of the rest was plug and play. It might be easier than you think if you fit a nissan headunit.
I already have the Kenwood unit so was hoping to use it. The Connect 2 units that were an option seem expensive (at least the ones I've seen).


vexorg
Posts: 346
Joined: Thu May 24, 2018 9:03 pm

Re: Visia reversing camera & head unit

Post by vexorg » Thu Dec 05, 2019 9:29 am

Do you have a photo of the loom connectors to the headunit, there are drawings that show the connections, you can see if the rear video line is there.


Gasmeter
Posts: 146
Joined: Wed Apr 27, 2016 2:45 pm

Re: Visia reversing camera & head unit

Post by Gasmeter » Thu Dec 05, 2019 7:55 pm

Hi yeoman . If your Kenwood doesn't fit there are connect 2 units on eBay starting at around £220 upward and the SD card around £35 which I have
Just a thought. 😀


yeoman
Posts: 9
Joined: Tue Dec 03, 2019 8:09 am

Re: Visia reversing camera & head unit

Post by yeoman » Fri Dec 06, 2019 6:42 pm

vexorg wrote:
Thu Dec 05, 2019 9:29 am
Do you have a photo of the loom connectors to the headunit, there are drawings that show the connections, you can see if the rear video line is there.
No photos I'm affraid.


yeoman
Posts: 9
Joined: Tue Dec 03, 2019 8:09 am

Re: Visia reversing camera & head unit

Post by yeoman » Fri Dec 06, 2019 6:46 pm

Gasmeter wrote:
Thu Dec 05, 2019 7:55 pm
Hi yeoman . If your Kenwood doesn't fit there are connect 2 units on eBay starting at around £220 upward and the SD card around £35 which I have
Just a thought. 😀
Hopefully the Kenwood unit will fit, its a double din unit. I will have to buy a wiring adaptor to convert the Nissan loom and antena lead. If there are issues with the Kenwood unit I'll get the connect 2.


Post Reply

Return to “Electronic systems”