Keyless Entry Button Faulty

Got a problem, look here to see if its known or let others know of the issue
Post Reply
smithyuk73
Posts: 2
Joined: Tue Mar 17, 2020 1:44 pm

Keyless Entry Button Faulty

Post by smithyuk73 » Fri Mar 20, 2020 9:53 pm

Hi guys

I've just brought a 2015 1.2 Juke Tekna

The small black rubber button is not working on the drivers door handle.

Is this common and where can I get a new one ?

Cheers

vexorg
Posts: 430
Joined: Thu May 24, 2018 9:03 pm

Re: Keyless Entry Button Faulty

Post by vexorg » Sat Mar 21, 2020 7:54 am

Ours started playing up too, was planning to strip it or replace it when the better weather came in, but sold it now.

You need to check with Nissan to see what parts you can buy, I doubt there will be much out there from the usual motor factors as it's a bit of a rare part since only the Tekna had them in older cars.

smithyuk73
Posts: 2
Joined: Tue Mar 17, 2020 1:44 pm

Re: Keyless Entry Button Faulty

Post by smithyuk73 » Tue Mar 24, 2020 9:00 pm

Thank for your help.

It seems intermittent so I've ordered a new battery for Fob. See how goes

vexorg
Posts: 430
Joined: Thu May 24, 2018 9:03 pm

Re: Keyless Entry Button Faulty

Post by vexorg » Wed Mar 25, 2020 9:11 am

Ours was definitely the button, the passenger door and boot worked instantly. The drivers door needed pushed in harder and forward.

bakertech
Posts: 146
Joined: Mon Dec 03, 2012 9:57 am

Re: Keyless Entry Button Faulty

Post by bakertech » Wed Mar 25, 2020 9:22 am

Check out Honest John of the telegraph as i think he recently told a reader how to overcome this problem.

Search Honest John/website
Juke owner

Post Reply